Table of Contents
Toggle07910 Oil Seals – 16×40×7mm TC Industrial Oil Seal Specifications and Applications
1. What Are 07910 Oil Seals?
07910 Oil Seals are sealing products identified by the 07910 series number. One documented industrial oil seal specification associated with this designation is the 07910-N10 Oil Seal, which features a standard TC double-lip design.
The 07910-N10 oil seal has dimensions of 16×40×7 mm (Inner Diameter × Outer Diameter × Width) and is manufactured using NBR70 rubber.
This oil seal is designed for rotating shaft applications where reliable lubrication retention and external dust protection are required. Its compact dimensions make it suitable for certain industrial machinery, motors, pumps, gearboxes, and other mechanical equipment.
It is important to note that 07910 is not a universally standardized oil seal size across all manufacturers. Different brands and product catalogs may use similar numbers for different sealing products. Therefore, buyers should confirm the complete part number, dimensions, and sealing structure before purchasing.

2. 07910-N10 Oil Seal Specifications
The 07910-N10 is a TC-type rubber-covered rotary shaft oil seal. Its double-lip structure helps prevent lubricant leakage while protecting internal components from external contaminants.
07910-N10 Oil Seal Dimensions
| Specification | Details |
|---|---|
| Product Number | 07910-N10 |
| Product Type | Industrial Oil Seal |
| Inner Diameter (ID) | 16 mm |
| Outer Diameter (OD) | 40 mm |
| Width (Height) | 7 mm |
| Dimensions | 16×40×7 mm |
| Oil Seal Structure | TC |
| Rubber Material | NBR |
| Rubber Hardness | 70 Shore A |
| Design | Double Lip with Garter Spring |
| Application | Industrial Machinery |
| Sealing Type | Rotary Shaft Seal |
These specifications provide a useful reference for customers searching for 07910 oil seals or replacement 07910-N10 industrial oil seals.
Before ordering, always check the shaft diameter, housing bore, installation width, operating temperature, rotational speed, and working medium to ensure compatibility.
3. What Is the TC Structure of a 07910 Oil Seal?
The 07910-N10 uses a TC-type oil seal structure. TC is one of the most common rotary shaft oil seal designs used in industrial and automotive applications.
The TC oil seal generally consists of a metal reinforcement ring, an elastomer outer covering, a primary sealing lip with a garter spring, and a secondary dust lip.
Main Features of the TC Oil Seal
1. Primary Sealing Lip
The primary sealing lip maintains contact with the rotating shaft. The garter spring provides additional radial force, helping maintain sealing performance and reduce lubricant leakage.
2. Secondary Dust Lip
The secondary lip provides additional protection against dust, dirt, and other external contaminants entering the equipment.
3. Rubber-Covered Outer Diameter
The rubber-coated outer surface helps provide a secure fit inside the housing and can improve sealing around the installation bore.
4. Metal Reinforcement Ring
The internal metal skeleton supports the oil seal structure and helps maintain its shape during installation and operation.
Because of these features, TC oil seals are widely used in industrial machinery, automotive components, pumps, electric motors, and gearboxes.
4. NBR70 Material for 07910 Oil Seals
The 07910-N10 oil seal uses NBR70 (Nitrile Butadiene Rubber) as its sealing material.
NBR is a commonly used rubber material for oil seals because of its good resistance to mineral oils, lubricating oils, and many common industrial fluids.
Advantages of NBR70 Oil Seals
Good resistance to mineral oils and lubricating oils.
Good wear resistance under suitable operating conditions.
Reliable elasticity and sealing contact.
Suitable for many conventional industrial applications.
Cost-effective for standard oil seal manufacturing.
Available for customized oil seal production.
NBR is generally suitable for applications with moderate operating temperatures. For equipment exposed to high temperatures, aggressive chemicals, or special fluids, alternative materials such as FKM, silicone, or PTFE may be more appropriate.
The correct material should always be selected according to the actual operating environment.

5. Applications of 07910-N10 Industrial Oil Seals
The 16×40×7 mm 07910-N10 oil seal can be considered for compatible rotating shaft applications.
Typical application areas include:
Industrial Motors
Oil seals help prevent lubricant leakage and protect motor components from dust and external contaminants.
Gearboxes and Reducers
In gearboxes and speed reducers, rotary shaft oil seals help retain lubricating oil around rotating shafts.
Industrial Pumps
Oil seals can be used in suitable pump designs to reduce fluid leakage and protect bearing areas.
Mechanical Transmission Equipment
TC oil seals are commonly used in transmission systems and other mechanical equipment where rotating shaft sealing is required.
Automotive Components
Depending on the shaft and housing dimensions, similar TC oil seal designs may also be used in certain automotive components.
Important: These are potential application categories, not confirmed original equipment applications for every 07910-N10 product. Actual compatibility must be verified against the equipment manufacturer’s specifications.

6. How to Choose the Correct 07910 Oil Seal Replacement
When searching for a replacement 07910 oil seal, buyers should not rely on the part number alone.
The following details should be checked:
1. Confirm the Dimensions
Measure the inner diameter, outer diameter, and width. For the documented 07910-N10 specification, the dimensions are 16×40×7 mm.
2. Confirm the Structure
Check whether the original oil seal uses a TC double-lip structure or another design.
3. Confirm the Rubber Material
NBR70 is suitable for many conventional lubricating oil applications. However, operating temperature and fluid compatibility must be considered.
4. Check the Operating Conditions
Consider shaft speed, temperature, pressure, lubricant type, and external contamination.
5. Verify the Installation Requirements
The housing bore, shaft surface, and available installation space should match the selected oil seal.
Choosing the correct oil seal helps improve sealing reliability, reduce maintenance costs, and extend equipment service life.

7. Customized 07910 Oil Seals Manufacturer – Feiyun Oil Seals Factory
Hello, my friend! I’m Locke from China Feiyun Seals Factory, located in Pingxiang County, China.
With more than 15 years of manufacturing experience, Feiyun specializes in producing customized rubber sealing products for industrial machinery, automotive components, and various mechanical applications.
Our main products include:
TC Oil Seals
O-Rings and O-Ring Repair Kits
High-Pressure Oil Seals
Hydraulic Oil Seals
Power Steering Oil Seals
PTFE Oil Seals
Automotive Oil Seals
Valve Oil Seals
GR, GS, and MT Polyurethane Elastic Pads
Why Choose Feiyun Oil Seals Factory?
1. More Than 15 Years of Manufacturing Experience
We have extensive experience in rubber sealing product manufacturing and understand the production requirements of different oil seal structures and materials.
2. Customized Oil Seal Production
We can manufacture oil seals according to customer drawings, samples, dimensions, and material requirements. Customized TC oil seals and other sealing products are available.
3. Professional Production Team
Our factory has a comprehensive employee training system. Our production team is familiar with rubber mixing, molding, vulcanization, trimming, inspection, and other manufacturing processes.
4. Strict Quality Control
We maintain strict quality requirements throughout the manufacturing process to help ensure dimensional accuracy and consistent product quality.
5. Reliable Delivery and Export Experience
We have extensive export experience and have served more than 500 customers worldwide. We pay close attention to delivery schedules and provide professional after-sales support.
6. One-Stop Sealing Product Supply
In addition to 07910-N10 oil seals, customers can source various customized rubber seals and industrial sealing products from our factory.
If you are looking for a reliable 07910 oil seal manufacturer or supplier in China, Feiyun is ready to support your sourcing requirements.
8. Frequently Asked Questions About 07910 Oil Seals
Q1: What size is a 07910-N10 oil seal?
The documented 07910-N10 industrial oil seal specification is 16×40×7 mm, including a 16 mm inner diameter, 40 mm outer diameter, and 7 mm width.
Q2: What type of oil seal is 07910-N10?
The 07910-N10 is identified as a TC-type double-lip rotary shaft oil seal with a garter spring.
Q3: What material is used for 07910 oil seals?
The documented 07910-N10 specification uses NBR70 (Nitrile Butadiene Rubber), a common material for industrial oil seals.
Q4: What is the difference between TC and other oil seal types?
TC oil seals generally feature a primary sealing lip with a garter spring and an additional dust lip. Other structures may have different lip configurations, reinforcement designs, or external surface treatments.
Q5: Can Feiyun manufacture customized 07910 oil seals?
Yes. Feiyun can manufacture customized oil seals according to drawings, samples, dimensions, and material specifications. Customers can contact us to discuss 07910-N10 requirements and other customized sealing products.
Q6: How can I order 07910-N10 oil seals from China?
You can send us your required dimensions, quantity, material, and application details. If available, please also provide a product drawing or sample. Our team can review your requirements and provide suitable manufacturing solutions.
9. Contact Feiyun for 07910 Oil Seals
Are you looking for 07910-N10 oil seals measuring 16×40×7 mm?
Feiyun Oil Seals Factory offers customized industrial oil seals, automotive oil seals, hydraulic seals, and other rubber sealing products.
Whether you need standard TC oil seals or customized sealing solutions, we are ready to support your project.
Contact Locke at Feiyun Oil Seals Factory today for product information, quotations, and customized oil seal manufacturing.
Official Website: https://www.fyoilseal.com


Leave A Comment