Table of Contents
Toggle07900 Oil Seals: Specifications, Types, Applications and Replacement Guide
1. What Are 07900 Oil Seals?
When searching for 07900 Oil Seals, buyers may encounter different products depending on the manufacturer, application, and complete part number. The number 07900 does not represent one universal oil seal size. It may refer to a standard rotary shaft oil seal or a specialized forklift oil seal.
Two possible product references are particularly important:
SKF / CR 7900 Oil Seal: A standard industrial rotary shaft oil seal, commonly associated with a 20 × 30 × 5 mm specification and HMS4 design.
91A24-07900 Oil Seal: A specialized forklift torque converter or oil pump seal, commonly listed with a 42 × 60 × 9 mm specification.
These products have different dimensions, structures, and applications. Therefore, buyers should verify the complete part number and actual measurements before purchasing or replacing a 07900 oil seal.

2. SKF / CR 7900 Industrial Rotary Shaft Oil Seal
The SKF / CR 7900 reference is associated with a standard metric rotary shaft oil seal used in industrial equipment, including electric motors, gearboxes, pumps, and other rotating machinery.
Specifications of SKF / CR 7900
| Parameter | Specification |
|---|---|
| Product Type | Rotary Shaft Oil Seal |
| Reference | SKF / CR 7900 |
| Design | HMS4 |
| Structure | Single Lip, Rubber Covered Outer Diameter |
| Inner Diameter (ID) | 20 mm |
| Outer Diameter (OD) | 30 mm |
| Width (W) | 5 mm |
| Material | NBR |
| Reinforcement | Metal Case |
| Spring | Garter Spring |
| Application | Motors, Gearboxes, Pumps |
The commonly referenced dimensions are 20 × 30 × 5 mm (ID × OD × Width). Buyers should verify the exact SKF product designation before treating this specification as a confirmed cross-reference.
Features of HMS4 Oil Seals
The HMS4 design is a rubber-covered rotary shaft seal featuring a single sealing lip without an additional dust lip.
Its main characteristics include:
Rubber-covered outer diameter for reliable housing contact.
Single sealing lip for retaining lubricating oil and grease.
Integrated metal reinforcement for structural stability.
Garter spring to maintain radial sealing force.
NBR rubber material for compatibility with many mineral oils and lubricants.
This type of oil seal is suitable for many conventional industrial sealing applications. Actual operating limits depend on the material compound, shaft speed, temperature, pressure, and lubrication conditions.
3. 91A24-07900 Forklift Torque Converter Oil Seal
Another important product associated with the keyword 07900 Oil Seals is the 91A24-07900 Oil Seal, which is commonly listed in forklift replacement parts markets.
This product is associated with Mitsubishi and Caterpillar forklift equipment and is used in torque converter or oil pump sealing applications.
Unlike the smaller industrial 7900 oil seal, the 91A24-07900 is a specialized replacement seal designed for forklift transmission-related equipment.
Specifications of 91A24-07900 Oil Seal
| Parameter | Specification |
|---|---|
| Part Number | 91A24-07900 |
| Alternative Number | K91A24-07900 |
| Cross Reference | 91A2407900 |
| Product Type | Forklift Oil Seal |
| Inner Diameter (ID) | 42 mm |
| Outer Diameter (OD) | 60 mm |
| Width (W) | 9 mm |
| Size | 42 × 60 × 9 mm |
| Application | Forklift Torque Converter / Oil Pump |
| Equipment | Mitsubishi / Caterpillar Forklifts |
The commonly listed dimensions are 42 × 60 × 9 mm. Always confirm the dimensions, sealing profile, and equipment compatibility with the original part before ordering.
Main Applications
The 91A24-07900 oil seal is commonly associated with:
Mitsubishi forklift transmission systems.
Caterpillar forklift equipment.
Forklift torque converters.
Hydraulic oil pump assemblies.
Industrial material handling equipment.
Its primary function is to prevent lubricant leakage and maintain proper sealing around rotating shafts in the relevant equipment.

91A24-07900 Replacement and Cross-Reference Numbers
When sourcing replacement parts, buyers may encounter several similar part numbers:
91A24-07900
K91A24-07900
91A2407900
These references are commonly used in aftermarket forklift parts listings. However, buyers should verify interchangeability with the original equipment manufacturer or supplier before placing an order.
4. What Is the Difference Between SKF / CR 7900 and 91A24-07900?
Although both products contain the number 07900, they are not the same oil seal.
| Comparison | SKF / CR 7900 | 91A24-07900 |
|---|---|---|
| Product Category | Industrial Oil Seal | Forklift Oil Seal |
| Size | 20 × 30 × 5 mm | 42 × 60 × 9 mm |
| Design Reference | HMS4 | Equipment-Specific Design |
| Main Material | NBR | Confirm Original Specification |
| Application | Motors, Pumps, Gearboxes | Forklift Torque Converter / Oil Pump |
| Product Reference | SKF / CR 7900 | Mitsubishi / Caterpillar Part Number |
Important: Never select an oil seal based only on the number 07900. Always check the complete part number, dimensions, structure, and application.

5. How to Choose the Correct 07900 Oil Seal?
Selecting the correct oil seal is essential for preventing leakage, protecting equipment, and extending service life.
Before purchasing a replacement, consider the following factors:
1. Confirm the Complete Part Number
Check whether your requirement is for SKF / CR 7900 or 91A24-07900. These are different product references.
2. Measure the Oil Seal Dimensions
Three basic measurements are required:
ID: Inner diameter, corresponding to the shaft diameter.
OD: Outer diameter, corresponding to the housing bore.
Width: Axial thickness of the oil seal.
3. Check the Sealing Structure
Different applications require different sealing designs, such as:
TC: Double-lip rubber-covered oil seal.
SC: Single-lip rubber-covered oil seal.
TB: Double-lip metal-case oil seal.
HMS4: SKF rotary shaft seal design.
The correct structure should match the original equipment requirements.

4. Select the Appropriate Rubber Material
Common oil seal materials include:
NBR (Nitrile Butadiene Rubber): Suitable for many conventional mineral oil and grease applications.
FKM (Fluoroelastomer): Suitable for applications requiring higher temperature and chemical resistance.
Silicone: Used in selected applications requiring specific low-temperature flexibility.
PTFE: Suitable for specialized sealing conditions involving friction, speed, or chemical compatibility requirements.
Material selection should be based on the actual operating environment.
6. Feiyun Oil Seals Factory – Your Professional Oil Seal Manufacturer in China
Hello, my friend! I’m Locke from China Feiyun Seals Factory, located in Pingxiang County, China.
With more than 15 years of experience in the sealing industry, our factory specializes in manufacturing customized rubber oil seals and other sealing products for global customers.
Our main products include:
TC Oil Seals
Automotive Oil Seals
Hydraulic Oil Seals
High-Pressure Oil Seals
Power Steering Oil Seals
PTFE Oil Seals
O-Rings and O-Ring Repair Kits
Valve Oil Seals
GR / GS / MT Polyurethane Elastic Pads
Why Choose Feiyun Oil Seals Factory?
1. More Than 15 Years of Manufacturing Experience
We have extensive experience in rubber sealing products and understand different manufacturing processes, product structures, and material requirements.
2. Customized Oil Seal Production
We can manufacture customized oil seals according to customer drawings, dimensions, samples, and technical specifications.
If you need a 07900 oil seal or a replacement for 91A24-07900, you can send us the original sample or product drawing for evaluation.
3. Strict Quality Control
Our factory maintains strict quality requirements throughout the production process to help ensure consistent product dimensions and performance.
4. Reliable Delivery Time
We carefully manage production schedules and delivery arrangements to support customers’ purchasing plans.
5. Extensive Export Experience
We have served more than 500 customers worldwide and have rich experience in international trade and export services.
6. Professional After-Sales Service
We value long-term business relationships and provide professional communication and after-sales support.
7. Customized 07900 Oil Seals – Contact Feiyun Today
Are you looking for a reliable supplier of 07900 Oil Seals?
Whether you need a standard industrial rotary shaft oil seal, a forklift oil seal, or a customized replacement product, Feiyun can help you find a suitable sealing solution.
We welcome inquiries from distributors, wholesalers, importers, machinery manufacturers, and automotive parts suppliers.
To help us identify the correct product, please provide:
Oil seal part number.
Inner diameter, outer diameter, and width.
Product drawing or sample photos.
Required material and sealing structure.
Estimated order quantity.
Contact Locke at Feiyun Oil Seals Factory today!
Website: https://www.fyoilseal.com
We look forward to building long-term business relationships with customers worldwide.


Leave A Comment